Dimensions
You are required to enter to two decimal places the overall dimensions of the vehicle combination, including the load. The dimensions include:
Height
This is measured from the ground to the highest point of the vehicle/load.
Length
This is measured from the furthest point at the front of the vehicle to the furthest point at the rear of the vehicle/load.
Width
This is measured from the widest point (excluding side mirrors) on one side of the vehicle/load to the widest point on the other side of the vehicle/load.
Description of Load
The description of the load is to be entered in space provided. It needs to be accurate to enable the assessment of ‘indivisibility’, ‘loading at minimum practical dimensions’ and ‘centre of gravity determination’
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Dimensions
You are required to enter to two decimal places the overall dimensions of the vehicle combination, including the load. The dimensions include:
Height
This is measured from the ground to the highest point of the vehicle/load.
Length
This is measured from the furthest point at the front of the vehicle to the furthest point at the rear of the vehicle/load.
Width
This is measured from the widest point (excluding side mirrors) on one side of the vehicle/load to the widest point on the other side of the vehicle/load.
Description of Load
The description of the load is to be entered in space provided. It needs to be accurate to enable the assessment of ‘indivisibility’, ‘loading at minimum practical dimensions’ and ‘centre of gravity determination’. For example, machinery (e.g. front end loaders, bulldozers) should be described specifically (e.g. Bulldozer D7 Caterpillar).
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Description of Load
You are required to enter a description of load (commodity) you are transporting. You are also required to select whether you are transporting the commodity in a 6.1/20ft shipping container and/or a 12.2m/40ft shipping container by ticking the appropriate check box.
Add Export Container Unit
If you are transporting more than one commodity then click ‘Add Export Container Unit’ and enter the details in the next available line. You can transport up ten (10) commodities on the one permit.
Delete Last Entered Export Container
If you wish to delete the last entered commodity then click ‘Delete Last Entered Export Container’.
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Dimensions
You are required to enter to two decimal places the overall dimensions of the vehicle combination, including the load. The dimensions include:
Height
This is measured from the ground to the highest point of the vehicle/load.
Length
This is measured from the furthest point at the front of the vehicle to the furthest point at the rear of the vehicle/load.
Width
This is measured from the widest point (excluding side mirrors) on one side of the vehicle/load to the widest point on the other side of the vehicle/load.
Description of Load
The description of the load is to be entered in space provided. It needs to be accurate to enable the assessment of ‘indivisibility’, ‘loading at minimum practical dimensions’ and ‘centre of gravity determination’. For example, machinery (e.g. front end loaders, bulldozers) should be described specifically (e.g. Bulldozer D7 Caterpillar). Buildings up to 7.0 metres in width (8.0 metres at the eaves) can be described as 'Transportable Home’, ‘Class room' etc.
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Dimensions
You are not required to enter the dimensions of the mobile crane. These dimensions are recorded in the Permits database and will appear on the issued permit.
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Dimensions
You are not required to enter the dimensions of the mobile crane. These dimensions are recorded in the Permits database and will appear on the issued permit.
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Dimensions
You are required to enter to two decimal places the overall dimensions of the vehicle combination, including the load. The dimensions include:
Height
This is measured from the ground to the highest point of the vehicle/load.
Length
This is measured from the furthest point at the front of the vehicle to the furthest point at the rear of the vehicle/load.
Width
This is measured from the widest point (excluding side mirrors) on one side of the vehicle/load to the widest point on the other side of the vehicle/load.
Description of Load
The description of the load is to be entered in space provided. It needs to be accurate to enable the assessment of ‘indivisibility’, ‘loading at minimum practical dimensions’ and ‘centre of gravity determination’. For example, machinery (e.g. front end loaders, bulldozers) should be described specifically (e.g. Bulldozer D7 Caterpillar). Buildings up to 7.0 metres in width (8.0 metres at the eaves) can be described as 'Transportable Home’, ‘Class room' etc.
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
Dimensions
You are required to enter to two decimal places the overall dimensions of the vehicle/vehicle combination. The dimensions include:
Height
This is measured from the ground to the highest point of the vehicle.
Length
This is measured from the furthest point at the front of the vehicle to the furthest point at the rear of the vehicle.
Width
This is measured from the widest point (excluding side mirrors) on one side of the vehicle to the widest point on the other side of the vehicle.
Description of Load
The description of the load is to be entered in space provided. For ‘Rubber Track Tractor’ please enter ‘Empty Travel’.
Authority Clearances
If your permit application requires authority clearances to be approved then they must be submitted with your application. You can select the authority clearances you have applied for by browsing the appropriate fields and using ‘CTRL/SHIFT + Click’ to select the required clearance(s). Submitting options include in person, post, fax or email. If you wish to email the authority clearance(s) then you can click the green email address dtei.vehiclepermits@sa.gov.au and this will take you to Microsoft outlook where you can simply attach them and send the email. If the authority clearance required is not listed, you can enter the details in the space provided.
Please call Vehicle Permits on 1300 882 249 if you require more information on authority clearances.
Permit Issue Instructions
You are required to select how you would like your new vehicle permit to be issued to you.
Collection
If selected, the permit will be available for pick up at Kateena St Regency Park.
Post
If selected, the permit will be posted out to you. Please enter your address details in spaces provided.
Fax
If selected, the permit will be faxed out to you. If a fax number was previously entered for Permits staff to contact you on then this number will be used and displayed in space provided (You can also edit this fax number if required). If you didn’t enter a fax number previously, then please enter the fax number in space provided.
Email
If selected, the permit will be emailed out to you in PDF format. If an email address was previously entered for Permits staff to contact you on then this address will be used and displayed in space provided (You can also edit this email address if required). If you didn’t enter an email address previously for Permits staff to contact you, then please enter the address in space provided.
